Teléfono: +34 938 272 932
SSX — SMART STRING BOX
SSX — Smart String Box

Combiner Box monitoring

on PV plants

Smart String Box is integrated into PV string boxes and allows knowing the main parameters and detect possible failures in the PV modules.

SSX — Smart String Box. Let's explain the features

The monitored information facilitates the operating and maintaining tasks of the park,
for a better performance and higher output of the solar park.

  • Modular Design
    Modular Design

    Webdom SSX is composed of a main board and up to 9 easy expandable sensor boards (current and voltage).

  • Hall Effect
    Hall Effect

    Hall effect sensors converts current flow magnetic field into a proportional voltage. Sensors are protected with a magnetic shield.

  • Up to 16 Strings, 40A.
    Up to 16 Strings, 40A.

    2, 4, 6, 8, 10, 12, 14, 16 Strings DC inputs in a modular fashion, using 2 current channels module boards. 40A max/Channel.

  • On board Datalogger
    On board Datalogger

    Fail-safe data recording in the last 365 days: Neither in the event of a supply voltage outage, save weather stations data to protect the plant.

  • Voltage sensor
    Voltage sensor

    Optional voltage sensor board capable of measuring up to 1500VDC using an external cable.

  • Logo customization
    Logo customization

    Electronics include polycarbonate protective cover with custom logo.

  • Communications
    Communications

    Data can be gathered using Modbus-RTU communication protocol, up to 115.2kbps with independent input/output connectors.

  • Temperature Sensor
    Temperature Sensor

    Current and voltage boards includes a temperature sensor that tracks evolution of heat for each connected string.

16

16 Total number of independent strings supported by SSX.

40 A

40A Maximum current supported by the Hall Effect current sensors.

360

360 Day available storage time supported by the on board datalogger.

Explore Smart String Box

The SSX - Smart String Monitor is the ideal complement for the photovoltaic combiner box, that allows you to connect several PV strings in parallel, and measure the current flowing through each string. The main goal is to facilitate the operation and maintenance task of the PV plant. The string current are measured by Hall effect sensors, and DC voltage is also being measured connecting an external cable.

In case of a sensor failure you don’t have to replace the whole main board but only the defective board. Voltage board includes one DC voltage channel, and voltage to be measured should be conduit to the Sunclix connector of the DC voltage board using an external cable. Remote data can be gathered using Modbus-RTU protocol, with Data+, Data-, GND and Shield connectors. Independent terminal blocks for input and output communication cables are being used.

Modular Design

The SSX is composed of a main board (main datalogger and Modbus interface), and current and voltage sensor boards (up to 9 boards).

Each current board sensor monitors one or two string inputs, up to 40A per string, being easily adaptable to the main board.

Easy to Replace

The current and voltage boards can be exchanged individually through two easy manipulating screws, without removing the main board. This design streamlines spare tasks and minimizes the out of service time.

In case of a sensor failure you don’t have to replace the whole main board but only the defective board.

Operating Conditions

Verification of operating conditions in environments with extreme temperatures and high relative humidities, typical in this kind of installations.

CERTIFICATES
CE
IEC 61000-6-3:2007
IEC61000-6-2:2005
IEC61439-1:2011
UL 1741 (optional)

Your assembly line

Many factories have assembly lines that are used to put together a variety of product models. Our semi-finished assembly SSX – Smart String Box provides spacers and screws to fix the board with the mounting plate inside the cabinet. You can easily add the SSX from workstation to workstation until the final assembly is produced.

Explore Smart String Box

The SSX - Smart String Monitor is the ideal complement for the photovoltaic combiner box, that allows you to connect several PV strings in parallel, and measure the current flowing through each string. The main goal is to facilitate the operation and maintenance task of the PV plant. The string current are measured by Hall effect sensors, and DC voltage is also being measured connecting an external cable.

In case of a sensor failure you don’t have to replace the whole main board but only the defective board. Voltage board includes one DC voltage channel, and voltage to be measured should be conduit to the Sunclix connector of the DC voltage board using an external cable. Remote data can be gathered using Modbus-RTU protocol, with Data+, Data-, GND and Shield connectors. Independent terminal blocks for input and output communication cables are being used.

Modular Design

The SSX is composed of a main board (main datalogger and Modbus interface), and current and voltage sensor boards (up to 9 boards).

Each current board sensor monitors one or two string inputs, up to 40A per string, being easily adaptable to the main board.

Easy to Replace

The current and voltage boards can be exchanged individually through two easy manipulating screws, without removing the main board. This design streamlines spare tasks and minimizes the out of service time.

In case of a sensor failure you don’t have to replace the whole main board but only the defective board.

Operating Conditions

Verification of operating conditions in environments with extreme temperatures and high relative humidities, typical in this kind of installations.

CERTIFICATES
CE
IEC 61000-6-3:2007
IEC61000-6-2:2005
IEC61439-1:2011
UL 1741 (optional)

Your assembly line

Many factories have assembly lines that are used to put together a variety of product models. Our semi-finished assembly SSX – Smart String Box provides spacers and screws to fix the board with the mounting plate inside the cabinet. You can easily add the SSX from workstation to workstation until the final assembly is produced.

SSX — Smart String Box. This is how it works.

The SSX is composed of a main board (main datalogger and Modbus interface), and current and voltage sensor boards (up to 8 boards). Each current board sensor monitors one or two string inputs, up to 40A per string, being easily adaptable to the main board.

Change the Name or Logo

You can customize the SSX — Smart String Box look and feel by changing the displayed name, the logo, or both.

SSX — Smart String Box. Product Options

The ssx is available in diferent configuration options. You can add or remove from the product the following components:
  • Polycarbonate Case

    Polycarbonate Case

    Include polycarbonate protective cover with custom logo, spacers and fastening screws.

  • PCB Metal Spacers

    PCB Metal Spacers

    6 metal spacers and screws needed to hold the electronic on mounting plate

  • Analog Inputs

    Analog Inputs

    Includes analog inputs (1x0-10V, 1 x 4-20mA, 2xPT100 / PT1000)

  • Digital Inputs

    Digital Inputs

    Digital inputs / outputs (4xDI, 4xDO)

  • Flash Memory Datalogger

    Flash Memory Datalogger

    Includes datalogger with storage capacity of up to 6 months.

SSX — Smart String Box has many specific technical applications

Below you will find various application notes for the Smart String Box each has been developed according to different needs and environments.

Smart String Box for PV plants.

The Smart String Monitor is integrated into PV string boxes and allows knowing the main parameters and detect possible failures in the PV modules. Webdom delivers strings boxes mounted and pre-wired in polyester enclosures, with fuses in positive and negative lines, surge voltage protection and main switch.

Power supply can be with external AC line 110/230VAC, or using a self-powered DC-DC converter. Cabinet for indoor/outdoor use with skew roof, made of insulating, slow-burning and self-extinguishing composite: Polyester + Glass fiber.

Smart String Box for PV plants.

Outage. On board Datalogger.

In case of power failure or mains, the datalogger incorporated in the electronic board keeps all historical data for 1 year. SSX analog inputs allow you to connect pyranometers, anemometers, temperature and humidity sensors, among others. The analog inputs are type 4-10mA, 0-10V, PT100 / PT1000.

With this system the sensors are connected directly to the box strings of each row of PV panels. Consequently meters minimizing wiring and lower installation costs and maintenance.

Outage. On board Datalogger.

Alarms. Digial Inputs - Outputs.

The digital inputs and outputs electronics Smart String Box allow you to connect all types of sensors for a more secure installation. Attaches an opening sensor in the door of the Smart String Box and thus control access. Connects to a theft detector PV panels through a closed loop fiber optics.

Alarms. Digial Inputs - Outputs.

32 Strings, 16 Sensors. 16 Strings, 16 Sensors.

For installations where a box of 32 Strings required with current sensors 16, 32 Strings two to two with the same control SSX-Smart String Box electronics are monitored. Each plate of two sensors of the electronic control holds up to 40A. The following diagram shows the comparative wiring between a facility that requires 32 (left) and 16 Strings (Right).

The following diagram shows the comparative wiring between a facility that requires 32 (left) and 16 Strings (Right).

32 Strings, 16 Sensors. 16 Strings, 16 Sensors.

24 Strings mounted vertically

24 Strings mounted vertically

24 Strings mounted vertically

DOCUMENTACIÓN Y DESCARGAS

SSX_V2

Documento en formato PDF (2.47 MB)

View Related Documentation

Our product brochures in digital version

VIEW CATALOGUE

More PV Information

Produces energy from renewable sources

VIEW INFORMATION

Looking for system specifications? Click here